- terry8922
Crack Repair Products
Updated: Sep 14, 2021
PowerCOAT Canada is now offering 3 different types of crack repair products that can be used with our floor coating systems.
All have unique properties and depending on what your needs are these products will give you the options you want.
Read further for more information on these products and click the links to download the tech data sheets to learn more about how they are used.

PP-CF is a two part, high penetration, fast setting, hybrid polyurea for repairing and re-building damaged concrete. The product is a 1:1 ratio, easy to mix system that is 98 % solids and VOC compliant. The PP-CF can be used to set anchor bolts, repair damaged control joints, fill spalling, and rebuild vertical curbing and steps. Sand or gravel can be added to extend the volume of the material and act as filler for repairing large spalls, holes and cracks.
Click here to view the tech data sheet on this product
PRODUCT PROPERTIES
Application temperature between 23°F to 100.4°F (-5°C to 38°C)
Product cures in 10 minutes @ 71.6°F (22°C) with excellent adhesion
Self-leveling and self-priming
Ready to service in 10 to 20 minutes
Easy to mix 1:1 ratio by volume
Highly chemical resistance
Excellent for industrial floor repairs subject to forklift traffic and harsh conditions
WHERE TO USE
Commercial freezer repairs
Aircraft hangar floors
Low temperature equipment
Maintenance facility floors
Garage floors
Industrial shop floors
Car washes or wash bays
Forming/ rebuilding stairs and steps
Leveling and grade matching
Bridge/ street repairs
Concrete polishing and other coating applications
Non-moving control joint fill

PPG FLR800 is a 2 part epoxy crack filler gel for repairing both horizontal and vertical cracks in concrete.
Click here to view the tech data sheet on this product
PRODUCT PROPERTIES
Can be applied thicker for horizontal surfaces
Can be top-coated with epoxy immediately after application
100% Solids, Ultra-Low VOC (<11 g/L)
Self-priming
Easy to mix 1:1 ratio by volume
Excellent chemical resistance
Surface application temperature should be between 55°F (13°C) and 95°F (35°C)
Low Odor
WHERE TO USE
Aircraft hangar floors
Maintenance facility floors
Garage floors
Industrial shop floors
Concrete polishing and other coating applications
Non-moving control joint fill

Top Gun 400 Elastomeric Acrylic Urethane Sealant is made with Kevlar® for exceptional strength and durability. This premium technology has superior adhesion to most building substrates with greater than 800% elongation. It is an internally plasticized sealant that reduces dirt pickup, eliminates yellowing and shiners. It forms a permanently flexible, airtight, water-resistant seal offering exceptional protection from environmental conditions. Effective on wood, drywall, plastic, metal, brick, masonry, stucco/EIFS, marble, glass, porcelain and ceramic tile.
Click here to view the tech data sheet on this product
PRODUCT PROPERTIES
Lifetime Limited Warranty
Super Adhesion
Permanent Flexibility
Internally Plasticized
Excellent Paintability
Interior/Exterior
Cured Caulk is Mildew Resistant
Exceeds ASTM C920, Class 25
WHERE TO USE
Crown Molding
Windows and Doors
Baseboards
Pipes and Vents
Siding and Trim
Sinks and Counters
Expansion and Control Joints up to 2” x ½”