top of page
S Y S T E M
INDUSTRIAL
R E S I S T A N T F L O O R
Epoxies have proven their ability to resist the worst uses for a floor in the past decades because they are easy to clean, seamless, impermeable, non-bacterial and chemical resistant. The POWERPOXY-100 is a great product for industrial flooring. Plus, its available in a few variations of formulas like low temperature application, fast cure and aggressive chemical resistant. These systems can be tinted in a large variety of colors
SYSTEM 1
Solid color system. This is the standard system it shows great abrasion resistance, adhesion and its very easy to clean.
LAYER
THICKNESS
EPOXY SERIES
PRIMER
8 Mils
(200 SQF/GAL)
POWERPOXY
100
TOPCOAT
8 Mils
(200 SQF/GAL)
POWERPOXY
100
NOTE :
Silica sand can be used in full broadcast in
the basecoat to give more perforation resistance.
Silica sand can be used in partial broadcast into
the topcoat to give an anti-slip finish.
The standard grit for the silica sand is 32 to 40.
TopCoat
PowerPoxy 100
Primer
PowerPoxy 100
SYSTEM 2
Orange peel finish system. This system gives an orange peel finish making it ideal for wet environments because of it's anti-slip texture plus, it's easy to clean.
LAYER
THICKNESS
EPOXY SERIES
PRIMER
8 Mils
(200 SQF/GAL)
POWERPOXY
100
TOPCOAT
10 -12 Mils
(80-160 SQF/GAL)
POWERPOXY
100
TopCoat
PowerPoxy 100
Primer
PowerPoxy 100
SYSTEM 3
This system gives an orange peel finish making it Ideal for wet environments because of it's anti-slip texture plus, it's easy to clean.
LAYER
THICKNESS
EPOXY SERIES
PRIMER
8 Mils
(200 SQF/GAL)
POWERPOXY
100
TOPCOAT
10 -12 Mils
(80-160 SQF/GAL)
POWERPOXY
100
TopCoat
PowerPoxy 100
Primer
PowerPoxy 100
bottom of page